The Power Train Lift is built to handle 1250 lbs., and its four swivel casters and compact design, only 3-1/2 feet wide and less than 5 feet long, make maneuvering it under the chassis an almost effortless job. Connect the specially modified air/hydraulic pump to you shop's air supply, and get precise control when raising/lowering the load, anywhere from 6-1/2 feet high back down to a low of 2-1/2 feet.
|
The tilting place adjusts 220 front-to-back, and 17-1/20 to each side; and width between the 4x4 wooden support blocks is adjustable from 0-29". Secure the load with a tough nylon strap. And when you've lowered the load to a comfortable working height, just use the no. OTC 1585 as a workbench!
|
Not only does the lift support engines and transaxles. It's also a good companion to have around when pulling rear ends, leaf springs, and a whole lot more. With the universal transmission adapter, pulling transmissions is no problem, either. Lifetime Warranty and made in the U.S.A.
|
