King Pin & Brake Anchor Pin Pusher 30-Ton

# OTC 4240 - Hydraulic Brake Anchor Pin & King Pin Pusher

Hydraulic force and precision tooling replace torch and hammer methods to remove king pins and anchor pins from most models of trucks and buses.

This is the answer! When servicing king pins, this unit is quickly mounted on the front axle. A unique Aswinging gate@ feature makes set-up easy. Both straight and tapered king pins may be serviced. Five special collars and two pins accommodate king pins of 7/8" to 2" in. diameter and up to 11-1/4" long. With tooling in position, up to 30 tons of hydraulic force is applied. Even the most tightly Afrozen@ king pin is eased out. A job that could consume the better part of a workday is done in minutes. With the special anchor pin adapter installed in the pusher=s base block, and the unit properly positioned over the brake spider, the anchor pin can be quickly and easily pressed out. Made in U.S.A.

Kit Includes:

King pin and anchor pin pusher with hydraulic hand pump, hose, hose half coupler, Power Twin 30-Ton ram, and anchor pin adaptor. Wt., 114 lbs.