Plasma Cutter 50 Amp

Previous PageTable Of ContentsIndexHome PageNext Page

No. SOL 2050 - 50 Amp Plasma Cutter

No. SOL 2050

50 Amp Plasma Cutter

The most popular, heavy-duty plasma cutter in our industry! Ideal for body shops, fleets, maintenance garages and farms. Cuts virtually and metal - thin 26 gauge sheet metal up to 1/2 inch thick. Three amp settings (30, 40, 50) provide speed and temperature best suited for the job.

  • No High Frequency to cause interference or damage to sensitive electronic equipment.
  • Trigger Activated Torch - with instant start.
  • Cuts 200 Inches of 14 gauge steel or 6 inches of 2 inch thick steel per minute.
  • Pilot Arc Cuts through paint and rusty surfaces.
  • Quickly Cuts steel, aluminum and stainless steel.
  • Easy Access front control panel.

Comes Complete with Tough, heavy-duty, 25 foot plasma torch, Torch stand off kit, Full front wide vision welding/cutting helmet, 15 foot ground cable and clamp assembly, 8 foot power cord, Built-in air pressure regulator and gauge, Wheel and handle kit with cord wrap bracket, Spare parts kit in a convenient tool box (5 electrodes, 5 high current nozzles, 5 low current nozzles, replacement 0-ring, silicone lubricant).

Made In U.S.A.



Primary Input:

208/230 V, 1 Phase, 60 Hz

Primary Amps:


Air Input:

4 cfm @ 70 psi

ARC Volts:


Secondary Output Amps:

30, 40, 50

Duty Cycle:



37.5" H x 16" W x 25.5" D


114 lbs.


1 Years Parts & Labor

Previous PageTop Of PageTable Of ContentsIndexHome PageNext Page