Professional Dual Scale Automotive DMM

General Technologies CT8030
Professional Dual Scale Automotive DMM

Product Code: GTC-CT8030

Regular Price: $389.50

Sale Price: $214.29

Shipping Weight: 1.50 pounds


This product has not been rated yet 0 Customer reviews
Be the first to write a product review


Enter Instant Cash Back Code Here If Available: 
Quantity:
Don't lose this product
Bookmark it, Email it, Share it 		Bookmark and Share

Dual Display Professional Automotive Digital Multimeter

No. GTC-CT8030

Dual Display Professional Automotive Digital Multimeter

For Use In:

Electronic and electrical circuits
Automobiles
Trucks
Trailers

 Boats
RVs
All 0 to 1000 Volt DC powered circuits
All o to 750 Volt AC powered circuits
Features:
  • State of the Art ergonomic design and styling for easier handling and use
  • Full autorange features
  • Large selectable 4¾ or 3¾ digit main display
  • 4 digits secondary display
  • 42 segments analog bargraph
  • DC Voltage measurement up to 1000 Volt
  • DC Voltage measurement up to 750 Volt
  • AC/DC Current measurement up to 10 A
  • Tachometer function with inductive pickup measures from 30 to 20000 rpm
  • Dwell measurement in degrees from 0 to 360º or duty cycle from 0 to 100%
  • Temperature measurement from -20ºC to 1000ºC or 0º to 1832ºF (selectable ºC or ºF)
  • Resistance measurement up to 40 MOhm
  • Frequency measurement from 10 to 20 KHz
  • Fuel Injection test measures pulse width from 0.05 to 250 mS, or duty cycle from 0 to 100%
  • Oxygen Sensor test function
  • Alternator test function
  • Fault Code Reader
  • DTC Decoder
  • Diode test
  • Continuity Test
  • Overload protection
  • Soft holster for instrument protection
  • Auto power off
CT8030 Applications:
  • Measure engine RPM, ignition dwell angle, and temperature of exhaust manifold, cooling system, air conditioning, heating system, catalytic converter, etc.
  • Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
  • Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
  • Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
  • An essential tool for all around troubleshooting of electrical and electronic circuit and systems.
Technical Specifications:
General Specifications:
Display
  • 4¾ digits main display
  • 4 digits secondary display
  • 42 Segments analog bargraph (20 updates/Second)
  • Backlight
  • Automatic( - ) negative polarity indicator
  • Automatic Zeroing
  • Automatic over-range indication
  • Low battery indicator

Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22

Physical dimensions (including holster) :
6.30” (H) x 3.22” (W) x 1.89” (D) - 160 mm x 82mm x 48 mm

Weight: Approximately 12.14 Oz ( 345 g) Including battery
Electrical Specifications:
  • DC Voltage: 0 to ± 1000V, ±0.3% ± 2 dgts., 10MΩ input impedance
  • AC Voltage: 0 to 750V, ±2.5% ± 5 dgts., 10MΩ input impedance, 50 to 500 Hz
  • DC Current: 0 to ± 10A, ± 0.8 % ± 4 dgts.,
  • AC Current: 0 to 10A, ± 0.8 % ± 4 dgts.
  • Resistance: 0 to 40 MΩ ± 0.8% ± 5 dgts.,
  • Frequency: 0 to 20 KHz, ± 0.01 % ± 2 dgts.
  • Tachometer: 30 to 20000 RPM, ± 2 RPM
  • Dwell: 0 to 360º, ± 1.2°/ krpm/cyl + 2d
  • Fuel Injector (pulse width): 0.05 to 250 mS, ± 0.05 mS +1d
  • Oxygen Test: Measures cross count up to 10/Second
  • Alternator Test: Measures output voltage ripple, beeps if ripple exceeds 0.45V
  • Fault code reader: Retrieves blink type fault codes
  • DTC Decoder: Retrieves Impulse Code Diagnostic Trouble Codes
  • Diode test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage
  • Continuity Test: Audible indicator (Buzzer) with circuit resistance is below 100 Ohm
  • Temperature: -20º to 1000°C or 0°F to 1832°F (±2% + 1 dgts.)
Accessories Included:
  • Battery: 9 Volt alkaline battery included
  • Test probes: One red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II),
    35½" long
  • Temperature probe: Bead type K thermocouple
  • Inductive Pickup for tachometer function
  • Hard Storage/Carrying Case: Polypropylene foam padded case
  • Soft protective holster
  • User Manual
Ergonomic Features:
  • The smaller and ergonomic profile compared with previous models makes handling and operation easier and more convenient
  • Single knob selects function and range
  • Rugged plastic enclosure
  • Soft anti-slip rubber holster protects the instrument against impacts and chemicals
  • Large easy to read 1/2" (12.5 mm) digits display
  • Design allows comfortable hand holding or resting at convenient places horizontally or at an angle by using the stand at the back of the holster

Related Item(s)

Code Name Image Price  
GTC-CT8027 Professional Automotive DMM Regular Price: $239.9
Sale Price: $163.53
GTC-CT8022 Digital Multimeter Auto Range Regular Price: $69.9
Sale Price: $51.29
GTC-FF310 Electrical Fault Finder FF310 General Technologies Regular Price: $235.5
Sale Price: $128.57
GTC-ST05 Oxygen Sensor Tester Regular Price: $199
Sale Price: $125.36

Customer Reviews

Average Customer Review: Not yet rated

Write an online review and share your thoughts with others.

There are no reviews